VÖGELN rings are displayed in US sizes 5–11. Ring-size standards vary between regions and manufacturers. Use the millimetre measurements below as the source of truth.
FIT INDEX
| DISPLAYED SIZE | HK PRODUCTION SIZE | INNER DIAMETER | FINGER CIRCUMFERENCE |
|---|---|---|---|
| US 5 | HK 11 | 15.9 mm | 49.9 mm |
| US 6 | HK 13 | 16.6 mm | 52.1 mm |
| US 7 | HK 15 | 17.3 mm | 54.3 mm |
| US 8 | HK 17 | 18.0 mm | 56.5 mm |
| US 9 | HK 19 | 18.7 mm | 58.7 mm |
| US 10 | HK 21 | 19.4 mm | 60.9 mm |
| US 11 | HK 23 | 20.1 mm | 63.1 mm |
01 / MEASURE AN EXISTING RING
Select a ring that fits the intended finger. Place it flat and measure straight across the widest part of the inner opening. Measure the empty space only; do not include the metal. Match the result to the inner-diameter column.
02 / MEASURE YOUR FINGER
Wrap a 5 mm-wide strip of non-stretch paper snugly around the base of the intended finger. Mark where the paper overlaps, then measure that length in millimetres. Repeat three times and use the largest consistent result.
FIT CONDITIONS
- Measure at the end of the day while your hands are warm.
- Measure the exact finger and hand on which the object will be worn.
- If your measurement falls between two sizes, select the larger size.
- Wider and heavier bands can feel tighter than narrow rings.
- Individual objects may vary slightly because they are hand-finished.
ASSISTED FIT
Uncertain about your selection? Send the internal diameter of an existing ring in millimetres to info@vogeln.net. Include the object reference and a clear photograph of the ring beside a ruler.
